Empowering Business Growth Through Seamless Connections
-
Science City, Ahmedabad, Gujarat, India
-
-
You are at the end
| Technical Data | ||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||
| Production capacity and fineness Capacity of Model BCM-10 is widely vary from 25-200 kg/hr but generally 50-100 kg/hr and fineness is in the range of 100-600 meshes but in general 200-500 meshes. These data are nominal and vary widely from case to case depending upon material characteristic, fineness required, operational and other factors. All the data given are nominal only and may vary widely from case to case depending upon many factors Application Agrochemicals, Pigments, Resin, Minerals (Soft), Chemicals etc |
The BONANZA AIR CLASSIFYING MILL with integrated grinding, classifying, conveying and collecting operations.
The basic machine consists of
The Bonanza Air Classifying Mill
The bonanza air classifying mill is vertical hammer mill with built in separator wheel to produce fine powder more economically and to the most critical tolerance. The system of this mill consists of basic mill with feeding screw, pulse jet dust collector and rotary air lock valve, fan and control panel.
The Principle Of Operation
The material to be ground is conveyed to the grinding chamber through feed hopper by variable feed screw mechanism. Hammers provide high impact on the material at high velocity against liner, thus causing disintegration of material to higher fineness. The primary air stream, which enters from below the rotor assembly via baffle ring, flowing up the inner wall of the liner, carries, the particles upward via shroud ring and then deflected by the dispersion ring into the separator wheel. In this section two forces opposite of each other affect each grounded particle. The suction force caused by flowing air and the centrifugal force caused by the rotation of separator. If the suction force is prevailing, the material is discharged with the primary air stream as finished product. If the material particles are not yet fine enough, the centrifugal force prevails, then particles are rejected by the separator and thrown back into the grinding zone by means of the secondary air stream. Acceptable fines pass through the separator because of the suction created by the fan on discharge side and collected efficiently in the pulse jet dust collector and then discharge through rotary air lock valve.
Empowering Business Growth Through Seamless Connections
© Copyright B2B India All Right Reserved
Designed & Developed by @ Pcube Softechs